Operating instructions
Table Of Contents
- General Settings Guide
- Introduction
- Important
- Notes:
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- Display Panel
- Accessing User Tools
- 1. Connecting the Machine
- Connecting to the Interfaces
- Network Settings
- Settings Required to Use the Printer/LAN-Fax
- Settings Required to Use Internet Fax
- Settings Required to Use E-mail Function
- Settings Required to Use Scan to Folder Function
- Settings Required to Use the Network Delivery Scanner
- Settings Required to Use Network TWAIN Scanner
- Settings Required to Use Document Server
- Using Utilities to Make Network Settings
- Connecting the Machine to a Telephone Line and Telephone
- 2. System Settings
- 3. Copier / Document Server Features
- 4. Facsimile Features
- General Features
- Scan Settings
- Send Settings
- Reception Settings
- Initial Settings
- Reception File Setting
- Program / Change / Delete Scan Size
- Registering Fax Information
- Forwarding
- Parameter Settings
- Special Senders to Treat Differently
- Authorized Reception
- Reception File Print Quantity
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray
- Programming/Changing Special Senders
- Authorized RX (Authorized Reception)
- Reception File Print Qty
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray per Sender
- Programming Initial Set Up of a Special Sender
- Deleting a Special Sender
- Box Settings
- 5. Printer Features
- 6. Scanner Features
- 7. Registering Addresses and Users for Facsimile/Scanner Functions
- Address Book
- Registering Names
- Authentication Information
- Fax Destination
- Fax Destination
- IP-Fax Destination
- Registering an IP-Fax Destination
- Changing a Registered IP-Fax Destination
- Using the IP–Fax Destination as the sender
- To change the IP-Fax Destination
- To select the protocol
- To program the SUB Code
- To program the SEP Code
- To set the International TX Mode
- To select the fax header
- Deleting a Registered IP-Fax Destination
- E-mail Destination
- Registering Folders
- Registering Names to a Group
- Registering a Protection Code
- Registering SMTP and LDAP Authentication
- 8. Other User Tools
- 9. Appendix
- INDEX
Appendix
284
9
❖ Power consumption:
The complete system consists of the main unit, booklet finisher, large capacity
tray, file format converter, IEEE 802.11b (wireless LAN) interface unit, and
USB Host interface unit.
❖ Dimensions (W × D × H up to exposure glass):
670×670×760mm, 26.8"×26.8"×30.4"
❖ Space for main unit (W × D):
Type 1,2: 910×670mm, 36.4"×26.8"
❖ Noise emission:
Sound power level:
• Main unit only
• Complete system
Sound pressure level:
• Main unit only
Main unit only Complete system
Warm-up about 1.44 kW about 1.44 kW
Stand-by about 250W about 280 kW
During printing about 1.2 kW about 1.3 kW
Maximum about 1.44 kW about 1.44 kW
Type 1 Type 2
Stand-by less than 44 dB(A) less than 44 dB(A)
Copying less than 66 dB(A) less than 67 dB(A)
Type 1 Type 2
Stand-by less than 45 dB(A) less than 45 dB(A)
Copying less than 71 dB(A) less than 71 dB(A)
Type 1 Type 2
Stand-by less than 32 dB(A) less than 32 dB(A)
Copying less than 52 dB(A) less than 53 dB(A)