Operating instructions
Table Of Contents
- General Settings Guide
- Introduction
- Important
- Notes:
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- Display Panel
- Accessing User Tools
- 1. Connecting the Machine
- Connecting to the Interfaces
- Network Settings
- Settings Required to Use the Printer/LAN-Fax
- Settings Required to Use Internet Fax
- Settings Required to Use E-mail Function
- Settings Required to Use Scan to Folder Function
- Settings Required to Use the Network Delivery Scanner
- Settings Required to Use Network TWAIN Scanner
- Settings Required to Use Document Server
- Using Utilities to Make Network Settings
- Connecting the Machine to a Telephone Line and Telephone
- 2. System Settings
- 3. Copier / Document Server Features
- 4. Facsimile Features
- General Features
- Scan Settings
- Send Settings
- Reception Settings
- Initial Settings
- Reception File Setting
- Program / Change / Delete Scan Size
- Registering Fax Information
- Forwarding
- Parameter Settings
- Special Senders to Treat Differently
- Authorized Reception
- Reception File Print Quantity
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray
- Programming/Changing Special Senders
- Authorized RX (Authorized Reception)
- Reception File Print Qty
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray per Sender
- Programming Initial Set Up of a Special Sender
- Deleting a Special Sender
- Box Settings
- 5. Printer Features
- 6. Scanner Features
- 7. Registering Addresses and Users for Facsimile/Scanner Functions
- Address Book
- Registering Names
- Authentication Information
- Fax Destination
- Fax Destination
- IP-Fax Destination
- Registering an IP-Fax Destination
- Changing a Registered IP-Fax Destination
- Using the IP–Fax Destination as the sender
- To change the IP-Fax Destination
- To select the protocol
- To program the SUB Code
- To program the SEP Code
- To set the International TX Mode
- To select the fax header
- Deleting a Registered IP-Fax Destination
- E-mail Destination
- Registering Folders
- Registering Names to a Group
- Registering a Protection Code
- Registering SMTP and LDAP Authentication
- 8. Other User Tools
- 9. Appendix
- INDEX
Registering Addresses and Users for Facsimile/Scanner Functions
240
7
Registering Folders
By registering a shared folder, you can send scan files to it directly.
There are three types of protocol you can use:
•SMB
For sending files to shared Windows folders.
•FTP
Use when sending files to an FTP server.
•NCP
Use when sending files to an Net- Ware server.
Note
❒ For details about protocols, server names, and folder levels, consult your net-
work administrator.
❒ You can prevent unauthorized users from accessing folders from the ma-
chine. See "Registering a Protection Code".
❒ You can only select either SMB, FTP, or NCP. If you change protocol after fin-
ishing your settings, all previous entries are cleared.
Using SMB to Connect
Note
❒ To register a folder in an FTP server, see "Using FTP to Connect".
❒ To register a folder in an NetWare server, see "Using NCP to Connect".
Reference
p.246 “Using FTP to Connect”
p.251 “Using NCP to Connect”
Registering an SMB Folder
A Press [System Settings].
B Press [Administrator Tools].