Operating instructions
Table Of Contents
- General Settings Guide
- Introduction
- Important
- Notes:
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- Display Panel
- Accessing User Tools
- 1. Connecting the Machine
- Connecting to the Interfaces
- Network Settings
- Settings Required to Use the Printer/LAN-Fax
- Settings Required to Use Internet Fax
- Settings Required to Use E-mail Function
- Settings Required to Use Scan to Folder Function
- Settings Required to Use the Network Delivery Scanner
- Settings Required to Use Network TWAIN Scanner
- Settings Required to Use Document Server
- Using Utilities to Make Network Settings
- Connecting the Machine to a Telephone Line and Telephone
- 2. System Settings
- 3. Copier / Document Server Features
- 4. Facsimile Features
- General Features
- Scan Settings
- Send Settings
- Reception Settings
- Initial Settings
- Reception File Setting
- Program / Change / Delete Scan Size
- Registering Fax Information
- Forwarding
- Parameter Settings
- Special Senders to Treat Differently
- Authorized Reception
- Reception File Print Quantity
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray
- Programming/Changing Special Senders
- Authorized RX (Authorized Reception)
- Reception File Print Qty
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray per Sender
- Programming Initial Set Up of a Special Sender
- Deleting a Special Sender
- Box Settings
- 5. Printer Features
- 6. Scanner Features
- 7. Registering Addresses and Users for Facsimile/Scanner Functions
- Address Book
- Registering Names
- Authentication Information
- Fax Destination
- Fax Destination
- IP-Fax Destination
- Registering an IP-Fax Destination
- Changing a Registered IP-Fax Destination
- Using the IP–Fax Destination as the sender
- To change the IP-Fax Destination
- To select the protocol
- To program the SUB Code
- To program the SEP Code
- To set the International TX Mode
- To select the fax header
- Deleting a Registered IP-Fax Destination
- E-mail Destination
- Registering Folders
- Registering Names to a Group
- Registering a Protection Code
- Registering SMTP and LDAP Authentication
- 8. Other User Tools
- 9. Appendix
- INDEX
185
5. Printer Features
This chapter describes user tools in the Printer Features menu. For details on
how to access Printer Features, see "Accessing User Tools (System Settings)".
Test Print
This section describes the user tools in the Test Print menu under Printer Fea-
tures.
❖ Multiple Lists
You can print the configuration page and error log.
❖ Configuration Page
You can print the machine's current configuration values.
❖ Error Log
You can print error logs listing all errors that occurred during printing. The most
recent 30 errors are stored in the error log. If a new error is added when there are
30 errors already stored, the oldest error is deleted. However, if the oldest error
belongs to one of the following types of print jobs, it is not deleted. Instead, it will
be stored separately in error logs for each job type, up to a maximum of 30 for
each log. You can check any of these print jobs for error log information.
•Sample Print
•Locked Print
•Hold Print
•Stored Print
The records of Auto Job Cancel and jobs canceled manually from the control
panel can be printed.
❖ Menu List
You can print a Menu List showing the machine's function menus.
❖ PCL Config./Font Page
You can print the current configuration and installed PCL font list.
❖ PS Config./Font Page
You can print the current configuration and installed PostScript font list.
This menu can be selected only when the optional PostScript 3 unit is in-
stalled.
❖ PDF Config./Font Page
You can print the current configuration and installed PDF font list.
This menu can be selected only when the PostScript 3 unit is installed.
❖ Hex Dump
You can print in the Hex Dump mode.