Operating instructions
Table Of Contents
- General Settings Guide
- Introduction
- Important
- Notes:
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- Display Panel
- Accessing User Tools
- 1. Connecting the Machine
- Connecting to the Interfaces
- Network Settings
- Settings Required to Use the Printer/LAN-Fax
- Settings Required to Use Internet Fax
- Settings Required to Use E-mail Function
- Settings Required to Use Scan to Folder Function
- Settings Required to Use the Network Delivery Scanner
- Settings Required to Use Network TWAIN Scanner
- Settings Required to Use Document Server
- Using Utilities to Make Network Settings
- Connecting the Machine to a Telephone Line and Telephone
- 2. System Settings
- 3. Copier / Document Server Features
- 4. Facsimile Features
- General Features
- Scan Settings
- Send Settings
- Reception Settings
- Initial Settings
- Reception File Setting
- Program / Change / Delete Scan Size
- Registering Fax Information
- Forwarding
- Parameter Settings
- Special Senders to Treat Differently
- Authorized Reception
- Reception File Print Quantity
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray
- Programming/Changing Special Senders
- Authorized RX (Authorized Reception)
- Reception File Print Qty
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray per Sender
- Programming Initial Set Up of a Special Sender
- Deleting a Special Sender
- Box Settings
- 5. Printer Features
- 6. Scanner Features
- 7. Registering Addresses and Users for Facsimile/Scanner Functions
- Address Book
- Registering Names
- Authentication Information
- Fax Destination
- Fax Destination
- IP-Fax Destination
- Registering an IP-Fax Destination
- Changing a Registered IP-Fax Destination
- Using the IP–Fax Destination as the sender
- To change the IP-Fax Destination
- To select the protocol
- To program the SUB Code
- To program the SEP Code
- To set the International TX Mode
- To select the fax header
- Deleting a Registered IP-Fax Destination
- E-mail Destination
- Registering Folders
- Registering Names to a Group
- Registering a Protection Code
- Registering SMTP and LDAP Authentication
- 8. Other User Tools
- 9. Appendix
- INDEX
Adjust Color Image
119
3
Adjust Color Image
This section describes the user tools in the Adjust Color Image menu under
Copier / Document Server Features.
Default settings are shown in bold type.
❖ Background Density of ADS (Full Color)
"The background density is adjusted to skip the texture and copy. You can ad-
just the background density up to 5 levels when in Full Color.
Center of the 5 level adjustment is set by default.
❖ Color Sensitivity
You can adjust the color specified to convert in "Color Convert" and the color
specified for "Erase Color", in 5 levels.
Center of the 5 level adjustment is set by default.
When the color width has been set to "Wider", and the color to be deleted, for
example is red, all the colors that are close to magenta and orange are deleted.
If it's set to "Narrower" the color red will be deleted.
❖ A.C.S. Sensitivity
This 5-step setting determines the level of the standard used for discriminat-
ing between black & white originals and full color originals when "Auto Col-
or Select" is selected.
Center of the 5 level adjustment is set by default.
❖ A.C.S. Priority
This setting determines the copy priority between "Black & White" and "Full
Color" when "Auto Color Select" is selected.
• Full Color
• Black & White
Reference
p.3 “Accessing User Tools”