Specifications

USING THE SELF-TIMER
Now it's your turn to get into the shot!
1. Push the Self-Timer Button fully. Then the Self Timer LED (red lamp) on the front of the camera begins to blink
on and off. The shutter will be released about 10 seconds after activation. (Fig. 27) The LED lights steadily two
seconds before the shutter is released, to indicate that the shutter is about to be released.
* If you wish to cancel the self-timer once it has started, press the Shutter Release Button.4www.butkus.org
* When using the self-timer with flash photography, you must (re)activate the Self-Timer Button after the Flash
Ready Lamp is lit.
(OPTIONAL) DATABACK SETTINGS
Nomenclature of the date imprinting feature (Fig, 28)
(1) Display panel
(2) Month indication
3 Imprint mark
(4) Set button
(5) Selector button
(6) Mode selector button
Imprinting mode
Examples of date imprinting (Fig. 29)
(1) 1991 July 21 st
(2) 21 st 15:59
(3) No imprinting
(4) July21st, 1991
(5) 21stJuly, 1991
The date imprinting mode can be divided into 5 types; date, time, and no imprinting.
Selecting imprinting mode (Fig. 29)
Each time the Mode selector button is pressed, the display changes as shown below.
(1) Date (Year/month/day)
(2) Time (Day/hour/minute)
(3) No imprinting Date
(4) (Month/day/year) 4www.butkus.org
(5) Date (Day/month/year)