User guide

24
Harmony Scan User Guide
The Scan module does not vectorize these types of digital drawings and you cannot view them in the Control
Center. If you do decide to use these drawings, you must follow the standard procedure for scanning drawings for a
regular scene (with the Control Center and Stage Modules).
To manually build a list of drawings to Scan:
1. Select File > Build Manual List.
The Manual List dialog box appears.
2. In the Path field, type an existing directory path where you want to store the scanned drawings in the Path field.
3. You can type a name in the Prefix field that appears at the beginning of the scanned files that correspond to the
drawing names you subsequently add to the manual list.
For example, if you enter the name of the character joe in the Prefix field, then add the drawing names 01 and
02, the Drawing List would display 01 and 02, but once you scan the drawings, the files would appear as follows:
 joe-01
 joe-02
The prefix and a dash automatically appear in front of the drawing names you add when the Scan module creates
the files of the scanned drawings.
4.Type the name of the drawing you want to scan in the Drawings field and click the Add button. The name of your
drawing appears in the Drawings panel. Repeat for every drawings you must add.
 For a quick way to create a series of drawings, you can type the first number and the last number with a
colon symbol (:) in between.
For example, if you want to create a series of drawings number one to six, you would type the following in
the Drawings field and click on the Add button:
D 1:6