User guide

18
Harmony Scan User Guide
3. Select the appropriate feeding type from the Control Panel:
 Autofeed: Select this option to feed the drawings through the automatic document feeder (ADF).
 Autofeed (One): Select this option to accept one drawing from the ADF when the Scan button is being
pressed.
 Pegged: Select this option to scan a drawing from the flatbed each time the Scan button is being pressed.
 Pegged (Many): Select this option to automatically scan a drawing from the flatbed every five to ten
seconds (depending on the time required to process the drawings).
 Pan Cel: Select this option to scan a drawing that is bigger than the scanner window in separate sections.
4. Click Preview.
 If you are manually pegging the drawing, make sure you close the scanner cover before you click the
Preview button.
When the scan is complete, the drawing appears in the Scan module preview area.
5. Adjust the image parameters. Different options appear on the Control Panel, depending on the Scan Type you
selected earlier. Refer to
Setting up the Scanner topic to learn how to set the Scan Type.
 Threshold
When using a Black and White scan type, use this slider to adjust the exposure.
 Black Point
When using a Greyscale scan type, use this slider (in conjunction with the White Point Slider) to adjust the
contrast. Greyscale values that are less than the selected value will be converted to black.
 White Point
When using a Greyscale scan type, use this slider (in conjunction with the Black Point Slider) to adjust the
contrast. Greyscale values that are greater than the selected value will be converted to white.
 Gamma
When using a Colour scan type, use this slider to adjust the colour contrast.
 Speed
Use this slider to adjust the time required to scan a line (measured in lines per millisecond) at which to scan
drawings, if your scanner supports variable speeds. Use the drop-down menu to set predefined speeds of
Fast or Normal.
Use the drop-down menu to set a predefined or custom speed:
D Fast: Set a predefined speed for fast scans.
D Normal: Set a predefined speed for normal scans.
D Custom: Set a custom speed for your scans. The slider will become active and you can use it to set the
required speed.
Black and White scan options Greyscale scan options Colour scan options