User guide

Chapter 3: How to Scan Scanning with the Harmony Scan Module
15
8. Select the field chart size of your element from the drop-down list.
9. When you are done:
 Click OK to add the element and return to the Database Selector.
 Click Add to add the element and keep the dialog box open to add more.
 Click Close to cancel and return to the Database Selector without adding an element.
Creating and Editing a Drawing List
There are two ways you can create and edit a drawing list from the Scan module.
• Creating or Editing a Drawing List When Loading your Element.
Refer to the Launching the Harmony Scan Module and Loading Drawings topic to learn how to do this.
• Creating or Editing a Drawing List When your Element is Already Loaded.
To create or edit a drawing list when your element is already loaded:
1. In the Scan module, select Edit > Drawing List.
The Drawing Selector dialog box opens listing all the drawings contained in the loaded element.
 The Drawing column lists the name of the drawings.
 The Scanned? column indicates if the drawing has been scanned (Yes) or not (No).
2. Type a drawing name in the Add Drawing field.
3. Press on Add Drawing.
The new drawing appears in the list.