User guide

14
Harmony Scan User Guide
2. Select the Environment, Job and Scene in which you want to add elements.
3. Click on the Create Element button.
If the System Administrator did not complete the resolution configuration tasks, a warning message will open.
This message notifies you that the resolution.conf file was not properly inserted in the configuration folder.
 Click on the OK button to continue.
The Scan module interface and the Create Element dialog box open.
4. In the Name field, type the new element’s name.
5. Enable the Vector option if the element is to be vectorized.
6. Choose the Bitmap Format of your element from the drop-down list. This drop-down menu is only available if
you did not enable the Vector option.
7. Select the Scan Type option from the drop-down menu.
 Colour: Select this option to create a colour bitmap element.
 Greyscale: Select this option to create a greyscale bitmap element.
 B&W: Select this to create a vector based element that is going to be painted using the Stage or Paint
module.
 None: Select this option if you want to create an element that is not destined to be scanned, but that will be
imported.