User guide

8
Harmony Scan User Guide
D Colour: Select this option to scan a pre-coloured drawing, such as a background or an overlay.
• Scanner
Press this button to display a menu. Use the menu to select one of the scanners that is connected to the
host machine. The default model is the one that appears first in your scanner configuration file, scan.conf.
• Stop
Press this button to interrupt a scan that is in progress.
Checkboxes
• Flip Drawing: Select this option to flip the scanned image horizontally and realign the registration holes.
• Optical Registration: Select this option to automate the alignment of your drawings using the registration
holes on your drawing paper.
• Pencil Test: Select this option to create a black and white image with no paintable colour art regions.
Scan Options
Located at the left of the Scan module directly below the button bar, the scan options allow you to control the
following:
• Exposure
• Contrast
• Time required to scan a line, measured in lines per millisecond
Drawing List
The drawing list displays the names of the drawings which are loaded for scanning. As each drawing is scanned this
is indicated.
Frame Preview Panel
This shows the upcoming frame to be scanned.
Image Panel
The current drawing which is being scanned is shown in this panel.
Refer to the How to Scan and Scan Menu Commands chapters to learn more.
Black and White scan options Greyscale scan options Colour scan options