Setup guide

DeskTopBinder V2 Lite Introduction Guide
13
5
Inserting/Replacing a Section
To insert/replace a section, start from the [File] menu. The types
of data you can insert/replace are:
■ Data imported from a file
■ Image data scanned with a scanner
■ Clipboard images
■ Data captured from added documents
■ Image data scanned using easy scanning
≪ Note ≫
・To use a Scan or easy scanning to insert or replace a section, you must
first configure them using Extended Features.
Printing/Outputting/Converting a Section
To print, output or convert a section, start from the [File] menu,
the Output toolbar or Conversion toolbar.
The following methods are available:
■ Export as files
■ Print with Easy Print
■ Fax transmission （Send by Fax）
■ Print
■ Convert to an image file （Convert to Image)
≪ Note ≫
・ To use Easy Print or fax transmission, you must first configure them
with Extended Features.
・ Convert to Image is available only for image data.
Editing an Image Section
To edit an image, click [Edit Image] from the Section menu or the
Image Viewing toolbar.
To draw a figure, start from the [Graphics] menu or Drawing
toolbar.
The followings are available for editing an image.
■ Insert Text
■ Stamp
■ Insert Illustration
■ Straight Lines
■ Horizontal/Vertical Lines
■ Squares/Rectangles
■ Rounded Rectangles
■ Ovals
■ Polygons
■ Freehand
Copyright
©
2001

B428ENY0-02