Setup guide

Various settings
6
2
Note
❒ By clicking [Browse], you can select the save location from the tree dis-
play.
❒ You can select [Add as DeskTopBinder V2 document] only when DeskTop-
Binder V2 was already installed in the same computer as for ScanRouter
V2 Link.
E
Set the format of saving documents.
Select the format from the pull-down menus for [Black & White:] and [Grayscale/
Color:].
Reference
For more information about formats, see P.12 “File Formats”.
F
Select [OK].
You have finished setting the in-tray to be monitored.
G
If multiple in-trays are monitored, repeat Steps
B
to
F
to add the in-tray.
Dial-up-related Device
When the dial-up router is connected in an environment in which ScanRouter V2 is used
Appropriately perform the settings below. If the network environment is
changed, perform the settings again.
The delivery server must be set up.
• network device
• ScanRouter V2 Administration Utility
• ScanRouter V2 Link
• DeskTopBinder V2
A network device must be set up.
• Delivery server (set up in the setting of I/O devices of ScanRouter V2 Admin-
istration Utility)
Note
❒ Some network devices do not require the setting of I/O devices.
Important
❒ If the delivery server is connected when a connection to the delivery server
via the dial-up router is set, the line may be connected and telephone charges
may be collected.