Setup guide

Appendix
28
4
When selecting a server, the follow-
ing message appears: " The specified
computer name or IP address is not
valid. Please specify another name or
address. "
• Make sure that the server setting is correct and the IP
address and name are correct in network settings.
• You may be logged onto Windows under an account
that does not have administrator access. Log in un-
der an account that has the access right.
There is no response when [Browse] is
clicked in [Set I/O Device].
• Make sure that network devices are plugged in and
switched on.
• Make sure that connection can be made by selecting
a device by host name and/or IP address.
• Some I/O devices do not require any configuration.
If the devices are of this type, clicking [Browse] may
not display anything. If this is the case, make sure
that the device has the correct IP address for the de-
livery server.
After entering an IP address in [Set I/
O Device], the following message ap-
pears: " The selected I/O device is
not switched on, or is not available
on this network. "
• Make sure that the device is plugged in and
switched on.
• Some I/O devices do not require any configuration.
If this is the case, make sure that the device has the
correct IP address for the delivery server.
When adding or deleting a destina-
tion and updating the index, those on
the network device are not updated.
Some I/O devices do not automatically update destina-
tion lists. Press [Update Address] on the device to update
the delivery list. For more information, see the operat-
ing instructions that come with the network device.
When entering the password on the
[Authorization for Server Access] dialog
box, the following message is dis-
played " Your password may be in-
valid.If you are sure about password
you entered, press [Cancel] and close
the [Set Authorization for Server Ac-
cess] dialog box. "
The password for the starting Windows account may be
incorrect, or account authorization may have changed.
Make sure that the password and the authorizations are
correct and re-enter the password, then, restart the com-
puter.
Problem Possible Causes and Solutions