Setup guide

Server Settings
15
3
Server Settings
The following options and settings
are available with administrator
mode on the server.
Note
❒ Information such as available disk
space and server condition can be
found under [Server Information] in
the [Server] menu.
Select Server
When the ScanRouter V2 Administra-
tion Utility is started without a deliv-
ery service selected or when you are
administrating another delivery serv-
er, select a management server by
clicking [Select Server] from the [Serv-
er] menu.
Set Administrator
If the administrator or the administra-
tor password changes, change the ad-
ministrator settings in [ Set
Administrator] in the [Server] menu.
The following sections can be
changed:
• Password
Set Preferences
The delivery system environment can
be modified by [Set Preferences] in the
[Server] menu.
Default Image Format
This setting controls the default for-
mat for saved images.
Note
❒ Choose from the following default
image save formats:
• Save as Windows file
❒ If the delivery type is [In-Tray save],
images will be saved in the default
format configured on the network
device.
Error/Disk Space
This controls methods of notification
for errors and for low disk space.
❖
❖❖
❖ Error Notification
Controls methods for notification
of errors.
• From the [Output printer] drop-
down list, select a printer from
those displayed for use with the
[Output to printer] setting. Only
one printer can be selected.
❖
❖❖
❖ Server disk space
These settings control how the server
handles a lack of server disk space.
• [Issue alert at:] allows you to set
when the server will notify you
of low disk space. The default is
250 MB.
• [Suspend at:] allows you to set
when the server will suspend
delivery.