Setup guide

Using the Delivery System
10
2
❖
❖❖
❖ Changing an IP Address
When the IP address of the deliv-
ery server or network device is
changed, perform the following:
• When the IP address of a net-
work device is changed, delete
the device, and then add the de-
vice with its new IP address
again. ⇒ P.16 “Set I/O Device”
Note
❒ If the network device is not listed
in [Set I/O Device], confirm that the
device has the correct IP address
for the delivery server.
❒ If the network environment chang-
es, make the necessary changes on
clients and network devices with
connected ScanRouter V2 Admin-
istration Utility, ScanRouter V2
Link or DeskTopBinder V2, to cor-
rect server information. Correct in-
formation of connecting devices on
[Set I/O Device] from ScanRouter V2
Administration Utility.
Reference
⇒ P.31 “Dial-up Connection”
Miscellaneous
❖
❖❖
❖ Changing the Schedule
To change the starting time for
maintenance. ⇒ P.15 “Set Prefer-
ences”
❖
❖❖
❖ Changing the Administrator
To change the administrator pass-
word. ⇒ P.15 “Set Administrator”
Troubleshooting
If a problem arises, see "Trouble-
shooting", and take the appropriate
measures.
If data is corrupted, the system is un-
stable or does not operate correctly
for some reason, load the backup da-
ta. If this is impossible, select [Return
to Installation Defaults] from the [Mainte-
nance] menu for initialization, and
then restore the backup data.
Reference
⇒ P.27 “Troubleshooting”
⇒ P.24 “Maintenance”