Setup guide

Using the Delivery System
6
2
❖
❖❖
❖ Adding Network Devices
Select and add a network device.
Not all devices need to be added.
Reference
⇒ P.16 “Set I/O Device”
❖
❖❖
❖ Setting Delivery Features
Delivery system options:
• Undelivered Data
This setting controls how unde-
livered documents are handled.
• User Index
Controls display of [Destination]
and [Sender] on network devic-
es, once having set [Set I/O De-
vice] from the [Server] menu.
Reference
⇒ P.16 “Set Delivery Feature De-
faults”
Preparation for delivery operation
Several settings are required before
delivery can begin.
❖
❖❖
❖ Adding Destinations
Set destinations for users first.
Registered users can be selected
into groups. Appropriate delivery
settings must be made for each
destination.
Reference
⇒ P.17 “Destinations”
❖
❖❖
❖ Adding Senders
This function adds the senders.
You can set them while adding
destinations. Some network devic-
es use the destination as for sender
information, so it is not necessary
to add senders.
Reference
⇒ P.19 “Senders”
❖
❖❖
❖ Limiting the Log Entry
Set the maximum log entry for the
delivery and error logs.
Reference
⇒ P.22 “Log Administration”
Launching/Quitting the
Delivery Server
Launching and quitting
❖
❖❖
❖ Launching the Delivery Server
Turn on the power to the delivery
server and start Windows. Server
start-up varies with your installa-
tion options.
❖
❖❖
❖ Quitting the Delivery Server
When turning off or restarting the
delivery server, suspend delivery
service first, then shut down Win-
dows and turn off the computer.
Starting delivery service
Delivery service can be started from
the [Server] menu of ScanRouter V2
Administration Utility or when the
delivery server starts up, delivery ser-
vice is to be started as set during in-
stallation.
❖
❖❖
❖ Launch at Startup
When you log into Windows using
the ScanRouter V2 Lite starting ac-
count, delivery service will auto-
matically begin.