Setup guide

Basic Settings
15
4
A Open the tree of [Delivery Server]
on the left side of the dialog
box to select [Destination] in [De-
livery Table].
The [Operations] menu appears
on the menu bar.
B Select [Add New Destination-User]
on the [Operations] menu.
The "Add New Destination-Us-
er" dialog box appears.
C Enter an in-tray name in the
[Name] box.
D Set a delivery type.
A
Select the delivery type from
the [Delivery type selection:]
box, and then select [Add].
• In-Tray save
Received documents are
saved in the in-tray. The
client computer can re-
ceive them by ScanRouter
V2 Link and DeskTop-
Binder V2.
• Save as Windows file
Delivered documents are
saved in the specified lo-
cation as a file. Multiple
locations can be specified.
Note
❒ Only the folders that is
identified the delivery
server can be specified as
a save location.
E Set a password if required.
A
Select [Set/Change Password].
B
Enter a password (within
eight alphanumeric charac-
ters) in two [Password:] boxes.
Since the lower [Password:]
box is used for confirmation,
enter the same password as
the upper password.
C
Select [OK].
F Select [OK].
The user is added to [Destination
List].
G Repeat the operation from Step
B to register all users.
E
Launch the delivery server.
Perform the operation below only
if the delivery server is launched
manually when the type of starting
the delivery service is set to [Pro-
gram Folder] during installation.
A Select [Resume Services] from
the [Server] menu.
The delivery server starts.