Instructions

5
– SUSE Linux Enterprise Server (SLES) 15.0 or later for x86 (64-bit)
InfoPrint XT 3.4 can run on these Windows platforms:
• For InfoPrint XT with InfoPrint Manager:
– Windows Server 2012 Standard Edition (64-bit)
– Windows Server 2012 R2 Standard Edition (64-bit)
– Windows Server 2016 Standard Edition (64-bit)
– Windows Server 2019 Standard Edition (64-bit)
• For InfoPrint XT with RICOH ProcessDirector:
– Windows Server 2016 (64-bit)
– Windows Server 2019 (64-bit)
• For InfoPrint XT as a stand-alone product:
– Windows Server 2012 Standard Edition (64-bit)
– Windows Server 2012 R2 Standard Edition (64-bit)
– Windows Server 2016 Standard Edition (64-bit)
– Windows Server 2019 Standard Edition (64-bit)
• For pdxtdownload for Linux:
– Red Hat Enterprise Linux 7.0 or later (64-bit)
– Red Hat Enterprise Linux 8.0 or later (64-bit)
– SUSE Linux Enterprise Server (SLES) 12.0 or later for x86 with Service Pack 3 (SP3)
(64-bit)
– SUSE Linux Enterprise Server (SLES) 15.0 or later for x86 with latest service packs (64-
bit)
Hardware requirements
An AIX, Linux or Windows server that is appropriately configured and running InfoPrint
Manager, or an AIX, Linux or Windows server running in an RICOH ProcessDirector
environment.
Publications
• InfoPrint XT for AIX: Installing and Using, G550-1339-06
• InfoPrint XT for Linux: Installing and Using, G550-20375-02
• InfoPrint XT for Windows: Installing and Using, G550-1340-06
• InfoPrint XT 3.4 License Information
PDF copies of the AIX , Linux and Windows Installing and Using Guides are shipped with their
respective products, and installed in
/usr/opt/pdxt/nls/doc/en_US/pdxtaix.pdf (AIX)