User manual

Figure 3
8. To determine which value is optimum, look for the number that appears on the left
of the lightest gray square with straight horizontal lines on both sides. (Figure 1)
When horizontal lines beside the lightest gray square are broken, select the optimal
adjustment value by referring to the lines broken in the opposite direction.
(Figure 2)
Figure 1 Figure 2
9. Once the optimum value is decided, go back to the printer dialog window & type in
the value. Hit Next to complete the change.
10. Next select the Adjust Print-Head Positions option.
11. Follow the screen shots to print out a test sheet. Select the Quality Priority/Speed
Priority option for printing the test pattern.
12. Once the test sheet has printed, review the page to determine the optimum level for
your printer.
13. To determine which value is optimum, look for the column
number that appears above the lightest gray square
with straight vertical lines on both sides for each row.
14. Once the optimum value is decided, go back to the
Printer Dialog Window & type in the value. Hit Next
to complete the change.
15. Follow the instructions on the next pages to install the PowerDriver R software.
Once completed, run a test print to see if the settings are acceptable. If banding is
extreme, start from step one and adjust the settings again until the optimum print
value is found.
Next is the loading of the software. You will need to load the PowerDriver R Ricoh
GX7000. Please follow the instructions in the PowerDriver section.
7
Sawgrass Technologies, Inc. ~ SubliJet
®
R Getting Started Guide for the Ricoh GX7000