feeder user manual

When the Machine Does Not Operate As wanted
10
1
“Memory is full.
Do you want to
store scanned
file?
” appears.
The scanned originals ex-
ceed the number of
sheets/pages that can be
stored in the hard disk.
• Press [Store File] to store pages that
have been scanned. Delete unneces-
sary files with [Delete File].
• Press [No] if you are not storing pag-
es that have been scanned. Delete
unnecessary files with [Delete File].
“
Self checking...”
appears.
The machine is perform-
ing image adjustment op-
erations.
The machine may perform periodic
maintenance during operations. The
frequency and duration of maintenance
depends on the humidity, temperature,
and printing factors such as number of
prints, paper size, and paper type. Wait
for the machine to get ready.
The user code entry
screen is displayed.
Users are restricted by
user management.
Enter the user code (up to eight digits),
and then press [OK].
The Authentication
screen appears.
Basic Authentication,
Windows Authentica-
tion, LDAP Authentica-
tion or Integration Server
Authentication is set.
Enter your login user name and user
password. See “When the Authentica-
tion Screen is Displayed”, About This
Machine.
“
You do not have
the privileges to
use this func-
tion.
” is displayed.
The use of the function is
restricted to authenticat-
ed users only.
Contact the administrator.
“
You do not have
the privileges to
use this function.
”
continues to be displayed
even though you have
entered a valid user code.
This user code is not al-
lowed to use the function
selected.
Press the { Energy Saver } key. Confirm
that the display goes off, and then press
the
{ Energy Saver } key again. The display
will return to the user code entry dis-
play. When printing under the copier or
printer function, press the
{ Energy Saver }
key only after printing has finished.
An error message re-
mains, even if misfed pa-
per is removed.
• When a misfeed mes-
sage appears, it re-
mains until you open
and close the cover as
required.
• Paper is still jammed
in the tray.
Clear misfed paper, and then open and
close the front cover. see p.93 “Clearing
Misfeeds”.
Original images are
printed on the reverse
side of the paper.
You may have loaded the
paper incorrectly.
Load paper correctly. Place paper in the
paper tray with the print side up. Load
paper into the bypass tray with the
print side down. See p.74 “Orientation-
Fixed Paper or Two-Sided Paper”.
Problem Cause Solution