User`s guide

Page 31
Ricoh eQuill Tablet | Version 1.0.2, Revision 1
C HAPTER 3 : Package Contents and Accessories
3.2 - Stylus Tether Cord Attachment
The tether cord can be used to attach the stylus to either the tablet (Option 1) or to the tablet
cover (Option 2).
3.2.1 - Option 1: Stylus Attachment to Tablet
1. Thread one loop of the Tether Cord through the Stylus eyelet hole.
2. Thread the other loop of the Tether Cord through the loop in step 1, and pull taut.
3. Thread the remaining loop through the Stylus Holder eyelet, insert the Stylus through the
loop, and pull taut.
4. Remove the Accessory Plug located on the side of the tablet and insert the Stylus Holder.
Note that there is a slot on each side of the tablet (for left or right handedness).
To remove the Accessory Plug, insert a small, flat screwdriver underneath the Accessory
Plug, and gently pry up while pulling. Use gentle pressure.
5. To secure, hook the Stylus in the Stylus Holder using the Stylus Hook.
Tether Cord
Loop
loops
Stylus
Eyelet
Stylus Hook