Specifications

6-6 DDP92/184 Finisher Maintenance Manual
M M L 0 0
6.1.5. Removal of the Main Tray
Applicable jigs and tools: +Screwdriver.
[Disassembling Procedures]
1. Push the Tray Upper-limit Sensor beside the Paper Exit Roller, then the Main Tray
goes down.
2. Open the Front Cover to make the Main Tray stopped.
3. Turn OFF the MAIN AC POWER.
4. Remove the 2 screws holding the Main Tray and lift the Main Tray up and off.
Figure 6-7. Removal of the Main Tray
[Assembling Procedures]
1. Reinstall the Main Tray reversing the procedure above.