Specifications

6-4 DDP92/184 Finisher Maintenance Manual
M M L 0 0
6.1.4. Removal of the Top Cover & the Paper Exit Cover
Applicable jigs and tools: +Screwdriver.
[Disassembling Procedures]
1. Open the Paper Exit Cover and remove the 2 screws holding the sub-tray and
remove the sub-tray.
Figure 6-4. Removal of the Top Cover and the Paper Exit Cover
2. Remove the two caps.
3. Open the Front Cover.
4. Remove the 6 screws holding the Top Cover and Remove the Top Cover.
Figure 6-5. Removal of the Top Cover and the Paper Exit Cover
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.