Specifications

5-40 DDP92/184 Finisher Maintenance Manual

M M L 0 0

5.2.41. E2EB FOLDING STOPPER ERROR

PRIMARY FACTOR; During the Folding Stopper operation, the stopper cannot detected.

PHENOMENON CAUSES & CHECK POINTS CORRECTIONS Maintenance

Ref + Page

1. This phenomenon

occurs because

the Folding

Stopper does not

operate.

1. The drive system for the

Folding Stopper is faulty.

Check:

Folding Stopper or its environs.

2. The breaking of cables or

the disconnecting of

connectors.

Repair the cable or reset the

connector

CN9 - M18

3. Motor fault. Replace:

Folding Stopper Motor (M18) 3.5, 3-7

4. PCB fault. Replace: FS-108H/HBM P/K 3.5, 3-7

2. This phenomenon

occurs though the

Folding Stopper

operates.

1. The mounting of the

sensor is faulty.

Reset the Sensor correctly.

Folding Stopper HP PS (PS27)

3.4, 3-3

2. Sensor fault. Replace: