Specifications

5-36 DDP92/184 Finisher Maintenance Manual
M M L 0 0
5.2.35. E2CA PAPER EXIT OPENING POS. ERROR
Figure 5-18. Error Code E2CA
PRIMARY FACTOR; During the Paper Exit Opening operation, the Opening cannot be detected.
PHENOMENON CAUSES & CHECK POINTS CORRECTIONS Maintenance
Ref + Page
1. This phenomenon
occurs because
the Paper Exit
Opening does not
operate.
1. The drive system for the
Paper Exit Opening
operation is faulty.
Check:
Paper Exit Opening or its
environs.
2. Motor fault. Replace:
Paper Exit Opening Motor (M8)
3.5, 3-7
3. The breaking of cables or
the disconnecting of
connectors.
Repair the cable or reset the
connector
CN1 - M8
4. PCB fault. Replace: FS-108H/HBM P/K
3.5, 3-7
2. This phenomenon
occurs though the
Paper Exit
Opening
operates.
1. The mounting sensor is
faulty.
Reset the Sensor correctly.
Paper Exit Opening PS (PS12)
3.4, 3-3
3. The breaking of cables or
the disconnecting of
connectors.
Repair the cable or reset the
connector
CN1 - PS12
4. Sensor fault. Replace:
Paper Exit Opening PS (PS12)
3.4, 3-3
5. PCB fault. Replace: FS-108H/HBM P/K 3.5, 3-7