Specifications

5-16 DDP92/184 Finisher Maintenance Manual
M M L 0 0
5.2.7. E03E FNS TOP COVER OPEN
E03F FNS FRONT COVER OPEN
Figure 5-11. Error Code E03E, E03F
PRIMARY FACTOR; E03E: Top Cover of finisher is open.
E03F: Front Cover of finisher is open.
PHENOMENON CAUSES & CHECK POINTS CORRECTIONS Maintenance
Ref + Page
1. This phenomenon
occurs because
the Cover is open.
1. Cover is open. Close the cover.
2. This phenomenon
occurs though the
Cover does not
open.
1. Switch or sensor fault. Replace:
Interlock (MS1)
Paper Exit Cover Open/Close
Detection PS (PS207)
3.4, 3-3
3.4, 3-3
2. The mounting of the switch
or sensor is faulty.
Reset:
Interlock (MS1)
Paper Exit Cover Open/Close
Detection PS (PS207)
3.4, 3-3
3.4, 3-3
3. The breaking of cables or
the disconnecting of
connectors.
Repair the cable or reset the
connector.
CN6 - MS1
CN1 - PS207
4. PCB fault. Replace: FS-108H/HBM P/K
3.5, 3-7