Specifications

4-10 DDP92/184 Finisher Maintenance Manual
M M L 0 0
4.3.5. Replacing the Paper Exit Opening Solenoid
Applicable jigs and tools: +Screwdriver, pliers, scale.
[Disassembling Procedures]
1. Remove the Rear Cover and the Top Cover. (Refer to item 6.1.2 on page 6-2) and
(Refer to item 6.1.4 on page 6-4)
2. Remove the +Screws and the Spring.
3. Remove the Paper Exit Opening Solenoid.
Figure 4-11. Removal of the Paper Exit Opening Solenoid
[Assembling Procedures]
1. Reinstall the Paper Exit Opening Solenoid reversing the procedure above.
2. Adjust the position of the Paper Exit Opening Solenoid. (Refer to item 6.3.8 on
page 6-40) and (Refer to item 6.3.9 on page 6-42)
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.