Specifications

Preventive Maintenance 4-7
M M L 0 0
4.3.3. Replacing the Stapler
Applicable jigs and tools: +Screwdriver, Stapler jig.
[Disassembling Procedures]
1. Remove the Front Cover. (Refer to item 6.1.3 on page 6-3)
2. Pull out the Stacker/stapler Unit by pulling on the handle.
3. Remove the Cartridge from the Stapler.
4. Remove the +screw holding the Staple Cover and remove the Staple Cover.
Figure 4-7. Removal of the Staple Cover
5. Detach the Connector and remove the 4 +screws holding the Stapler.
Figure 4-8. Removal of the Stapler
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.