Specifications

6-60 DDP92/184 Finisher Maintenance Manual
M M L 0 0
6.3.22. Adjusting the Folding Force
Applicable jigs and tools: Pliers.
[Preparation]
1. If necessary, you can change the force of the folding and pressure rollers as
described below.
[Adjustment Procedures]
1. Let the springs as illustrated below; a pressure spring on the folding roller, and a
fold spring on the pressure roller.
Force: If A = 8.5kgf
If B = 11.4kgf
If C = 14.4kgf
Figure 6-87. Adjustment of the Folding Force
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.
CAUTION:
If changing the forces, be sure to make the same change for all rollers at the same time.
CAUTION:
Be sure to attach the springs into like-labeled holes (either A, or B, or C ).