Specifications

Product Support Guide
D129 / D130
Ver.3.0 Page 16 of 46 10/9/2012
Subject to change without notice
Specifications / Documentation
General Specification
Confi
g
uration Deskto
p
Scannin
g
Element One-dimensional solid scannin
g
throu
g
h CCD
Printing Process Twin Laser beam scanning & electro-photographic printing
Development Dry two-component magnetic brush development system
Fusing Fusing roller type
First Copy Time D129 4.1
D130 3.5
Warm-u
p
Time Basic Model: Less than 15 sec / SP Model: Less than 19 sec
Power Source US 120-127V 60Hz 12A
Max Power Consumption US Less than 1584W
Dimension(WxDxH)
Mainframe
*
:
Less than 670 x 682 x 760 mm (w/o ARDF)
Less than 670 x 682 x 895 mm (w. ARDF)
Mainframe
*
+ Optional 2 Paper Bank + Fall-Prevention Material :
Less than 670 x 766 x 1020 mm (w/o ARDF)
Less than 670 x 766 x 1155 (w. ARDF)
670 x 677 x 760 (w ARDF, w/o Operational Panel)
670 x 677 x 1020 (w ARDF, w/o Operational Panel, w Optional 2
Paper Bank)
670 x 682 x 760 (w ARDF, w Operational Panel) *
Mainframe :
Less than 26.38 x 26.85 x 29.92 mm (w/o ARDF)
Less than 26.38 x 26.85 x 35.24 mm (w. ARDF)
Mainframe
*
+ Optional 2 Paper Bank + Fall-Prevention Material :
Less than 26.38 x 30.16 x 40.16 mm (w/o ARDF)
Less than 26.38 x 30.16 x 45.47 (w. ARDF)
26.4 x 26.7 x 30 (w ARDF, w/o Operational Panel)
26.4 x 26.7 x 40.2 (w ARDF, w/o Operational Panel, w Optional 2
Paper Bank)
26.4 x 26.9 x 30 (w ARDF, w Operational Panel) *
Wei
g
ht US:less than 97k
g
–
213.8 lbs