Specifications

Product Support Guide
D104/D106
Ver.1.5 Page 26 of 43 12/9/2011
Scan to E-mail
General Specification
Requirement: SMTP (Mail Server) Gateway and TCP/IP
Authorization function:
SMTP authentication
POP before SMTP authentication
Resolution: 100dpi, 200dpi, 300dpi, 400dpi, 600dpi (Default 200)
MAX E-mail address# in HDD: 2,000 addresses
Register Group address in HDD: Max. 100 Group (Max. 500 addresses in one group address)
Maintain E-mail address in HDD:
Direct input on operation panel,
Web Image Monitor, Smart Device Monitor for Admin
Input of destination E-mail address
via soft key:
Possible, Max. 100 destinations per job
Search E-mail address in HDD: By name and E-mail address
LDAP Search: Yes
Max. address numbers per send: Max. 500 addresses per send *1
Address numbers per send:
Address from HDD address book *1 Max. 500
Address directly input via soft key *1 *2 Max. 100
Address looked up via LDAP *1 *2 Max. 100
Attention: To, cc, bcc
Subject: Manual Input Max. 128 Characters via soft key
Pre-register by
user
22 subjects.
Max. 20 Characters per a subject
Body
Message:
Manual Input Max. 80 Characters via soft key
Pre-register by
user
5 body messages. 80 characters x 5 lines per a body message
Title name of the body message: Max. 20 characters per a name
Preset Message: “This e-mail included attached file sent from xxxx (machine model
name).”
E-mail Size (with restriction): 128- 102,400KB, Default = 2,048KB
E-mail Size (w/o restriction): 725MB
File type: Single Page TIFF/JPEG, Single Page PDF, Multi Page TIFF, Multi Page PDF,
High Compression PDF(single/multi)
Program User Setting: Yes (up to 10 programs)
Divide and send e-mail: Yes (By page or size) / No, Default = Yes(By size) *3
Resend: Yes / No, Default = Yes
1: Address from HDD address book + Address input via soft key + Address looked up via LDAP = Max.500.
2: Address directly input via soft key + Address looked up via LDAP = Max. 100.
3: If the sent file size exceeded the maximum E-mail size, it would be divided to multiple sending. In addition, the sent files might not be accepted by the
receiving side due to the limitation in the receiving capacity at the receiver SMTP server or E-mail software setting.
Subject to change without notice