Operation Manual

Creating your own printable le: from STL to gcode

Preparing for your next print

2.2 Changing lament

If you are ready to use a different role of lament for your next print, follow these steps to remove

your current role of lament.

STEP 1: Preheat your printer by selecting the

preheat icon in your screen and pushing the

button. Make sure the nozzle which contains

the lament you are about to exchange heats

up to at least 180 degrees Celsius.

STEP 2: Select the lament icon in your screen

and enter this menu by pushing the button. Se-

lect the extruder from which you want to re-

move the lament and select ‘unload’. The drive

unit will retract the lament.

STEP 3: Pull the quick release knob on the back

and pull the lament out all the way from the

feeding hole on the bottom. Make sure you roll

up your role of lament carefully and that the

end cannot get loose. Tangled lament can af-

fect the print the next time you use it.

STEP 1: Preheat your printer

STEP 2: Select ‘unload’

STEP 3: Pull the quick release knob.

STEP 4: Apply the new sticker