User`s guide

2-5
2.3 Preparation of stacker
Put the basket in the container beforehand. If you start printing without putting the basket, an error
message “No Basket: Container xxx” is displayed on the OCP of the printer.
[NOTE]
• It is impossible to output different sized forms in one basket.
• The front cover L is locked when the power switch is turned off or when the table
is rising. Before opening the front cover, turn on the power switch and wait until
the table lowers to the bottom.
1. Check that the lamp goes out.
2. Press the Open switch. Then the table lowers. (the lamp is fast blink)
3. Before opening the front cover L, wait until the table lowers the bottom. (the lamp is slow blink)
Hold the handle of the drawer unit and pull it forward.
Front cover L
Drawer unit
Handle
OG A 02
Lamp
Open switch