User`s guide

1-3

1.3 Component Locations

No. Component Description

1 Sample tray Holds up to 100 sheets of paper.

2 Top cover 1 Open this cover if a paper jam occurs.

3 Front cover L Open this cover to remove paper.

4 Front cover R Open this cover if a paper jam occurs.

5 Top cover 2 Open this cover if a paper jam occurs.

6 Open Switch

(Upper or Lower)

Press to open the upper or lower stacker cover. When you press the switch, the

table inside descends and the cover is unlocked. If the stacker is receiving paper

and automatic stacker selection is enabled, output switches to the next available

stacker before the Open switch takes effect. When the stacker is specifically

selected (via the OCP, Web, or in coming data stream), the Open switch takes

effect when the job finishes or the stacker is no longer receiving paper.

7 Lamp

(Upper or Lower

Stacker)

Solid light: The stacker is in use (receiving paper). The front cover remains

locked until the Open switch is pressed.

Fast blink: The table inside the stacker is descending. The front cover is locked.

Slow blink: The stacker is full or if the Open switch has been pressed. The front

cover will be unlocked only when the Open switch has been pressed.

Not lit: The stacker is not in use. The front cover remains locked until the Open

switch is pressed.

OG A 02

Container Stacker 1 (including sample tray)

1. Sample tray

2. Top cover 1

6. Open Switch 7. Lamp

3. Front cover L

4. Front cover R

Container Stacker 2

(

includin

throu

ath unit

)

6. Open Switch 7. Lamp

3. Front cover L

4. Front cover R

5. Top cover 2