User`s guide

20
3.2 Removing Paper
3.2.1 Container Stacker
Up to 1500 sheets of paper can be delivered to both the upper and the lower stackers of each container
stacker. The message Stacker xxx Full is displayed on the OCP when the stacker is full of paper.
Press the Open switch to unlock the upper or lower stacker cover. When you press the switch, the table
inside descends and the cover is unlocked. If the stacker is receiving paper and automatic stacker
selection is enabled, output switches to the next available stacker before the Open switch takes effect.
When the stacker is specifically selected (via the OCP, Web, or incoming data stream), the Open switch
takes effect when the job finishes or the stacker is no longer receiving paper.
Each Open switch has a lamp next to it that shows the status of the corresponding stacker:
Solid light:
The stacker is in use (receiving paper). The front cover remains locked until the Open
switch is pressed.
Fast blink: The table inside the stacker is descending. The front cover is locked.
Slow blink: The stacker is full or the Open switch has been pressed. The front cover remains locked
until the Open switch is pressed.
Not lit: The stacker is not in use. The front cover remains locked until the Open switch is pressed.
1. Make sure the container stacker lamp is blinking slowly.
2. Open Front Cover L and pull the drawer unit forward gently.
3.
Front Cover L
Drawer Unit
00LOG