User`s guide

2.2 Printer Settings

2.2.1 Stacking Mode

Short stacking mode lets you limit the amount of paper that can be delivered to the stackers. When the

Short Stacking selection is enabled, the printer detects “Paper Full” when the stacker is two-thirds full.

When the Short Stacking selection is disabled, the pritner detects “Paper Full” when the stacker is

completely full.

1. To set the Stacking Mode for a particular stacker, make the following selections from the OCP:

Finisher / Short Stacking

2. Click the desired stacker number to toggle the setting between “Enabled” and “Disabled” for

the short stacking mode.

We recommended that you enable the Short Stacking mode when using:

 paper that may curl heavily (paper curl exceeds 10 mm after printing).

 large-sized paper such as A3 and Ledger.

00LOG