User Guide

Operating Instructions Administrator Reference
239
❖
❖❖
❖ Configuration
Use the “set” command to make WINS active or inactive.
msh> wins interface_name {on | off}
•“on” means active and “off” means inactive.
❖
❖❖
❖ Address configuration
Use this command to configure a WINS server IP address.
msh> wins ifname {primary|secondary} IP address
• Use “primary” to configure a primary WINS server IP address.
• Use “secondary” to configure a secondary WINS server IP address.
• You cannot use “255.255.255.255” as the IP address.
❖
❖❖
❖ NBT (NetBIOS over TCP/IP) Scope ID Selection
You can specify the NBT scope ID.
msh> wins interface_name scope scope ID
• The scope ID is specified using up to 31 alphanumeric characters.
AutoNet
Use the “autonet” command to configure AutoNet settings.
Reference
For more information about AutoNet, see p.291 “Using AutoNet”.
❖
❖❖
❖ Display
You can display the current AutoNet settings.
msh> autonet