Extra Information

ManualsBrandsRicoh ManualsDigital CameraCaplio RR-1

Chapter

SETTINGS/MISCELLANEOUS

Changing Camera Settings................................. 120

Formatting a Card/Internal Memory ........................... 120

Keep Settings ............................................................ 121

Changing LCD Confirmation Time ............................. 122

Auto Power Off Setting............................................... 123

Beep Sound Setting ................................................... 124

Power Save Mode Setting .......................................... 124

Changing the File Numbering System ....................... 125

Changing Video-Out Signal Method (NTSC/PAL) ...... 126

Changing Display Language ...................................... 127

Initializing Settings ..................................................... 127

Using the Remote Control .................................. 129

Shooting ..................................................................... 129

Playing ....................................................................... 131

Erasing ....................................................................... 132

Summary of content (16 pages)

PAGE 1
Chapter 5 SETTINGS/MISCELLANEOUS Changing Camera Settings ................................. 120 Formatting a Card/Internal Memory ........................... 120 Keep Settings ............................................................ 121 Changing LCD Confirmation Time ............................. 122 Auto Power Off Setting ............................................... 123 Beep Sound Setting ................................................... 124 Power Save Mode Setting .............................
PAGE 2
Changing Camera Settings This section explains how to format (initialize) a SmartMedia memory card or the internal memory, and how to change the various settings such as auto power off, beep sound and keep settings. Formatting a Card/Internal Memory Note • A SmartMedia memory card with a write protect pad attached to it cannot be formatted. Remove the pad to format the SmartMedia memory card. See “Protecting Against Accidental Writing” (p. 26).
PAGE 3
Press the or button to select SmartMedia memory card or internal memory and press the ENTER button. FORMAT FORMAT MEMORY CARD FORMAT INTERNAL MEMORY BACK:CANCEL SEL.:ENTER 4 FORMAT FORMAT MEMORY CARD START:RELEASE CANCEL:CANCEL The “FORMATTING” message will be displayed. When formatting is completed, the display will return to the SET menu. 5 Keep Settings Settings/Miscellaneous The keep settings mode is for saving settings after the camera is turned off. The following settings can be saved.
PAGE 4
1 2 Set the mode dial to [ ]. Press the or button to select [KEEP SETTINGS] and press the ENTER button. SET 1/3 FORMAT KEEP SETTINGS LCD CONFIRMATION 1SEC. AUTO POWER OFF 1MIN BEEP SOUND ON SELECT: CHANGE: SEL.:ENTER 3 Note 4 • To cancel the setting, select [OFF]. Press the or to be saved. button to select the item Press the button to select [ON]. or KEEP SETTINGS 1/4 FLASH ON +/– OFF WHITE BALANCE OFF DATE IMPRINT OFF LANGUAGE OFF SELECT: CHANGE: BACK:CANCEL SEL.
PAGE 5
2 3 Press the or button to select [LCD CONFIRMATION]. Press the or button to select the image confirmation time (0 SEC., 1 SEC., 2 SEC., 3 SEC., 4 SEC., 5 SEC.) and press the ENTER button. SET 1/3 FORMAT KEEP SETTINGS LCD CONFIRMATION 1SEC. AUTO POWER OFF 1MIN BEEP SOUND ON SELECT: CHANGE: SEL.:ENTER Auto Power Off Setting The camera will turn off automatically (auto power off) in recording and playback modes to conserve the battery if it is left idle (no buttons operated) for the preset time.
PAGE 6
Beep Sound Setting Note • An error beep is not suppressed even when [BEEP SOUND] is set to [OFF]. The camera beeps to alert you when it records a picture. You can enable or disable the beep by changing the setting. 1 2 3 Set the mode dial to [ Press the SOUND]. or ]. button to select [BEEP Press the or button to select [ON] or [OFF] and press the ENTER button. SET 1/3 FORMAT KEEP SETTINGS LCD CONFIRMATION 1SEC. AUTO POWER OFF 1MIN BEEP SOUND ON SELECT: CHANGE: SEL.
PAGE 7
Changing the File Numbering System By enabling or disabling sequential numbering, you can determine the method for assigning consecutive numbers to files. In both cases, there is never any duplication of file names on the same memory card. ● When sequential numbering is ON File names are assigned in sequence from R0010001 to R9999999.
PAGE 8
3 Press the or button to select [ON] or [OFF] and press the ENTER button. SET 2/3 POWER SAVE MODE OFF SEQUENTIAL NO. OFF DATE SETTING 2001/10/15 VIDEO OUT MODE NTSC LANGUAGE ENGLISH SELECT: CHANGE: SEL.:ENTER If you select [OFF], files will be assigned numbers starting from RIMG0001. Changing Video-Out Signal Method (NTSC/PAL) Switches the video system for connecting the camera to a TV set to play record images on TV. See • “Connecting to a TV” (p.
PAGE 9
Changing Display Language The information on the LCD monitor can be displayed in English, French, German and Japanese. 1 2 3 Set the mode dial to [ Press the or [LANGUAGE]. ]. Note • Enable the keep settings mode to save the display language setting. See "Keep Settings" (p.121). button to select Press the or button to select the display language and press the ENTER button. SET 2/3 POWER SAVE MODE OFF SEQUENTIAL NO.
PAGE 10
Note • Recorded files are preserved intact even when the settings are initialized. 3 Press the shutter release button. INITIALIZE SETTING INITIALIZE ALL SETTINGS? START:RELEASE CANCEL:CANCEL The settings will be reset to their factory default settings and the display will return to the SET menu.
PAGE 11
Using the Remote Control This section explains how to operate the camera using the optional DR-3 remote control unit. Shooting The remote control unit can be used to operate the camera. It is particularly convenient when the camera is set up at a remote location or is in a fixed position. 1 2 Set the mode dial to shooting mode ( • • • • ) and press the button to select the recording destination. Important Note • The remote control receiver is located at the upper left of the LCD monitor.
PAGE 12
● In (Sound)/ (Motion Picture) mode Recording of the sound and image will start when the RELEASE button is pressed. Recording will stop when the RELEASE button is pressed again and the shots will be recorded. ■ Setting Exposure Compensation 1 2 Press the EV (+/–) button. Set the exposure compensation level using the FWD (왕) or REV (왓) button and press the ENTER button. Press the RELEASE button to take the picture.
PAGE 13
Playing Use the remote control unit to play back recorded files. 1 Set the mode dial on the camera to [ ] button to select the and press the playback source. The most recently recorded file will be played. 2 Press the FWD (왕) or REV (왓) button to select a file. RELEASE ERASE FWD PROGRAM EV ENTER MULTI REV The remote control unit buttons are operated in the same way as the buttons on the camera. ■ Magnifying an Image (Zoom Playback) 5 Press the PROGRAM button.
PAGE 14
2 Press the or button and the FWD (왕) or REV (왓) button to shift the playback position. Depending on the image size, you can change the magnification by pressing the ENTER button. See “Zoom Playback” (p.99). ● How to Cancel Zoom Playback Mode Press the PROGRAM button. ■ Displaying Multiple Images (Multi Image Playback) 1 Press the MULTI button. The images will be displayed in Multi playback. 2 3 Press the or button and the FWD (왕) or REV (왓) button to select a file to be played back.
PAGE 15
3 Use the FWD (왕) or REV (왓) button to select [ERASE SINGLE IMAGE] and press the ENTER button. ERASE ERASE SINGLE IMAGE ERASE ALL IMAGES ERASE SELECTED IMAGES SELECT: BACK:CANCEL 4 SEL.:ENTER Use the FWD (왕) or REV (왓) button to select the file to be erased and press the RELEASE button. RELEASE ERASE FWD PROGRAM Note EV ENTER MULTI REV • To cancel operation, press the CANCEL button on the camera. 5 The selected file will be erased.
PAGE 16
■ Erasing Selected Images 1 Note 2 • To cancel selection, press the ENTER button again. Select [ERASE SELECTED IMAGES] on the erase mode screen (step 3 ). Use the or button and the FWD (왕) or REV (왓) button to select the file to be erased and press the ENTER button. Repeat step 2 to select more images. Note • To cancel operation, press the CANCEL button on the camera. 134 3 Press the RELEASE button.