User guide

11
How to Use the [Option settings]
If you click the [MENU] button on the RICOH Gate La
window and select [Option settings] from the
displayed menu, the [Option settings] dialog box
appears.
Item Description Initial Setting
1 [Save automatically
when connected to
USB]
Select the check box to have images downloaded and saved automatically in your
computer when the camera is connected to your computer with the USB cable.
If you deselect the check box, your images will not be downloaded
automatically when you connect your camera to the computer. For
downloading, activate RICOH Gate La and click the [Save] button.
Save
automatically
2 [Destination folder] Specifies which folder to save your images in. The [Caplio] folder inside [My
Documents] is specified initially; if you want to change this, click the [Browse]
button to display the dialog box and then specify the folder.
3 [Create folder] Specifies how to create a folder.
[Not created]
Your downloaded images will all be saved in the folder specified in item “2
[Destination folder]”.
[For each date photographed]
Creates a new folder assigning the date the images were shot as the folder
name, and saves images shot on the same day in the same folder.
For example, if shot on September 1, 2006: [20060901] folder
[For each time saved]
Creates a new folder each time and save images in the folder. If images
are saved more than once in a day, a new folder is created each time.
The folder name format is “Saving date + Underscore + Three-digit serial
number”.
For example, if you saved twice on September 1, 2006:
[20060901_001] folder, [20060901_002] folder
Create a new
folder for each
date
photographed
4 [The same image will
not be saved]
When this check box is selected, images once loaded into your computer are
not loaded again. This check box is enabled only when [Not created] or [For
each date photographed] is selected in [Create folder].
To allow this function to work properly, the camera date and time must be
set correctly.
When this check box is deselected, previously loaded images are loaded again.
The same image
will not be saved
5 [Application software
settings]
To start an application after loaded images have been saved, specify the
application name here. To set an application, click the [Browse] button and
select the application in the displayed dialog box.
6 [Save and start
application software]
When this is checked, the application specified above is started after the
images have been saved.
When this is unchecked, the application is not started.
Application is
started
7 [Camera’s IP
Address]
Not used by this model but used by other models of Caplio camera. For
details, see the documentation that came with the camera.
0.0.0.0