User guide

7
If the screen below appears, select
[RICOH Gate La], check the box next to
[Always use this program for this action]
and then click [OK].
• Before closing RICOH Gate La, if you turn the
camera power off, or unplug the USB cable, the
RICOH Gate La window is minimized and displayed
as an icon on the Windows task bar. If you click the
icon, the window will be displayed again.
• You can change the folder for downloading your
images (Save Destination).
• For how to change the Save Destination Folder, see
P.11.
• For how to start RICOH Gate La, see P.10.
• For the RICOH Gate La window, see P.10.
 Connecting the Camera to the
Computer for the First Time
The first time you connect your camera to the
computer using a USB cable, the [Found New
Hardware Wizard] screen will appear (only
when [ORIGINAL] is selected for [USB
CONNECTION]).
The steps below use screenshots from
Windows XP.
1. Select [Install the software
automatically (Recommended)].
2. Insert the Caplio Software CD-
ROM into the CD-ROM drive on
your computer.
Installation of the WIA driver automatically
starts. If the CD-ROM is already on your
computer when the [Found New
Hardware Wizard] window is displayed,
simply click [Next] to start installation.
By default, the WIA driver is installed in the following
location:
If you have installed the ImageMixer:
If you have installed the DeskTopBinder Lite:
3. Select [RICOH Gate La], check
[Always use this program for this
action] check box, and then click
[OK].
• To load images from the camera with
assistance from the Windows XP
“Scanner and Camera Wizard”, select
[Microsoft Scanner and Camera Wizard].
• Leaving the [Always use this program for
this action] check box unchecked will
cause the [Caplio XX] screen to be
displayed each time you transfer images
from the camera, thereby allowing you to
choose whether to use [RICOH Gate La]
or the [Microsoft Scanner and Camera
Wizard] for image transfers.
My Computer
Local Disk
Program Files
Caplio Software
WIA driver
My Computer
Local Disk
Program Files
Caplio Software S
WIA driver