User guide

6
Downloading Images to
Your Computer
When you connect the camera to your
computer, you can download images from the
camera.
Downloading Images Using RICOH
Gate La
Images are downloaded to your computer from the
following memory sources.
RICOH Gate La automatically creates a folder
called [Caplio] inside your [My Documents]
folder. Downloaded images are saved in
folders with the date of each shot, inside the
[Caplio] folder. Set the correct date and time
on the camera before shooting.
1. Set [USB CONNECTION] to
[ORIGINAL] on the SETUP menu.
2. Make sure that the camera power
is off.
3. Connect the USB cable to the
USB port of your computer.
4. Connect the USB cable to the
USB terminal of your camera.
The camera turns on, RICOH Gate La
starts, and the RICOH Gate La window
appears.
Image transfer begins automatically.
For details about RICOH Gate La, see
P.10.
• When transferring images to a computer using
RICOH Gate La, the file being transferred is renamed
and saved.
• File names given by the camera are not used.
• Images are stored with sequential numbers so that
they have unique file names.
• Even when the storage folder is changed, the file
number will be continuous. The number cannot be
initialized.
• When transferring images to a computer using
RICOH Gate La, the files are assigned names like
[RIMG****.jpg] (**** indicates the number of the
image), even if [SEQUENTIAL NO.] is set to [ON].
• If images are not automatically downloaded, check
[Save automatically when connected to USB] in the
RICOH Gate La [Option settings] dialog box.
• For details about the RICOH Gate La [Option
settings] dialog box, see P.11.
• For details about [USB CONNECTION] (MASS STR/
ORIGINAL), see the “Camera User Guide”.
When no SD memory
card is loaded
When an SD memory
card is loaded
Loads from internal
memory
Loads from the SD
memory card