User guide

19
How to Use the [Option settings]
If you select [Option settings] from the [RICOH Gate
La Setup] menu, the [Option settings] dialog box
appears.
Item Description Initial Setting
1 [Automatically save
on connection]
Select the check box to have images downloaded and saved automatically
in your computer when the camera is connected to your computer with the
USB cable.
If you deselect the check box, your images will not be downloaded
automatically when you connect your camera to the computer. For
downloading, activate RICOH Gate La and click the [Save] button.
Transfer files
automatically
2 [Choose] Specifies which folder to save your images in.
For Mac OS 8.6, Mac OS 9.1, or earlier versions, this is the [Caplio] folder in the
root directory on the startup disk. For Mac OS 9.1 to 9.2.2, this is the [Caplio]
folder inside the [Documents] folder on the startup disk. To change the folder,
click the [Choose] button, open the dialog box, and then select the desired folder.
3 [Automatically create
folder on saving]
When this check box is selected, a folder to save the loaded images is
automatically created. Use the adjacent pull-down menu in [Destination
settings] to specify how to create the folder.
[For each date photographed]
Creates a new folder assigning the date the images were shot as the folder
name, and saves images shot on the same day in the same folder.
For example, if shot on September 1, 2006: [20060901] folder
[For each time saved]
Creates a new folder for each time images are saved and saves the
images. If images are saved more than once in a day, a new folder is
created each time.
The folder name format is “Saving date + Underscore + Three-digit serial
number”.
For example, if saved twice on September 1, 2006:
[20060901_001] folder, [20060901_002] folder
When this check box is deselected, loaded images are all saved to the folder
specified in “2 [Choose]”.
Create a new
folder for each
date
photographed
4 [The same image will
not be saved.]
When this check box is selected, images once loaded into your computer are
not loaded again. This can only be specified when [Automatically create
folder on saving] is deselected or when “3 [For each date photographed]” is
selected as the method for creating the folder.
To allow this function to work properly, the camera date and time must be
set correctly.
When this check box is deselected, previously loaded images are loaded again.
The same image
will not be saved
5 [Save and start
application software]
When this is checked, the application specified above is started after the
images have been saved.
When this is unchecked, the application is not started.
Application is not
started
6 [Choose] Specify the name of the application to start after images have been saved.
Click the [Choose] button to display the dialog box, and then specify which
application to use.