User guide

16
• For details about the RICOH Gate La [Option
settings] dialog box, see P.19.
• For details about [USB CONNECTION] (MASS STR/
ORIGINAL), see the “Camera User Guide”.
• For how to change the Save Destination Folder, see
P.19.
• For how to start RICOH Gate La, see P.18.
• For the RICOH Gate La window, see P.18.
Downloading Images Using
the Caplio Mounter
 For Mac OS 8.6 to 9.2.2
For Mac OS X 10.1.2 to 10.4.6
When downloading images to a computer
using the Caplio Mounter, you can specify a
folder where the images will be saved.
1. Set [USB CONNECTION] to
[ORIGINAL] on the SETUP menu.
2. Make sure that the camera power
is off.
3. Connect your camera to the
computer using the USB cable.
Your camera turns on.
When no SD memory card is loaded, the
[Caplio] icon is displayed and you can
view the image files stored in internal
memory.
When an SD memory card is loaded, the
[Caplio.SD] icon is displayed and you can
view the image files stored on the SD
memory card loaded.
4. Double-click the displayed icon.
It can be handled in the same way as a
normal drive. If you double-click the icon,
a folder called [DCIM] is displayed and a
folder called [100RICOH] within that
folder is displayed. The image files you
shot are inside the [100RICOH] folder.
You can use drag and drop to copy files
to the hard disk.
Caution
When using the Caplio Mounter, you cannot write data
onto an SD memory card.
Example of the display
in Mac OS 10.1.2 to 10.4.6
Example of the display
in Mac OS 10.1.2 to 10.4.6