User Guide Digital Camera Caplio R30

129
Changing Camera Settings
To transfer images in Mass Storage Mode, follow the
steps below:
1. Change [US B CONNECT ION] to [MASS ST R] on the Setup
menu.
2. Make su re that the camera pow er is o ff.
3. Connect the accessory USB cab le to a US B port o f yo ur
compu ter.
4. Connect the USB cable to the USB
terminal of the camera.
The camera power becomes on.
Your computer automatically reads a file
necessary for recognizing the camera as a
drive.
After this preparation, the camera is
displayed as a drive at My Computer
(Windows) or Desktop (Macintosh).
5. From the displayed drive,
copy a file to the desired
location.
The figure at right shows the folder
configuration in a drive.
When the contents of the built-in
memory are displayed, the drive
name is RICOHDCI.
Caution
• During transfer, do not disconnect the USB cable.
• If a file with the same name already exists at the destination, it is overwritten. If you do not
want the file to be overwritten, rename the file or transfer images to another folder.
Note
When a SD memory card is inserted, its files are displayed. Otherwise, files in the built-in
memory are displayed.
Example of the display in
Windows XP