User Guide Digital Camera Caplio R30

128
To change the USB communication system, follow the steps below:
1. Display the setup m enu.
For the operating procedure, see P.111.
2. Press th e " button to select [USB
CONNE CTION] and press the $
bu tto n.
3. Press th e !" b utto n to select a
value.
4. Press th e M/O or # button.
5. If th e # b utton was pressed in
Step 4, press the M/O butt on.
These settings are used until they are changed the next time.
Reference
For how to transfer images using RICOH Gate La, see P.143.