User Guide Digital Camera Caplio R30

126
Displaying a Setting Change Warning
(SHTG STGS WARNG.)
You can set the icon of a changed function to blink or a warning
message indicating a change will be displayed at power-on for about
5 seconds if the initial settings are changed for the following
functions.
•White Balance
•Focus
• ISO Setting
• Exposure Comp.
•Time Exposure
If you operate a camera button while an icon is blinking, the icon
stops blinking and lights steadily.
If you operate a camera button during a warning message display,
the message disappears.
To set whether to enable (ON) or disable (OFF) the shooting setting
alert, follow the steps below.
1. Display the setup m enu.
For detailed operation, see P.111.
2. Press th e " button to select
[SHT G STGS WARNG.] and press
the $ button.
3. Press th e !" buttons to select
the desired setting .
4. Press th e M/O or # button.
5. If you pressed the # button in step
4, press a lso the M/ O button.
This setting will be used until you change it.
Possible Settings
OFF
ON *Setting upon purchase