Specifications

UC5e OM Rev2-1 July 2004 35
Q: Will the UC5E work with all application software programs?
A: The customised printer drivers provided allow all Windows 3.11, Win-
dows 95, Windows 98, Windows ME, Windows NT, and Windows
2000 programs to send documents to the UC5E.
Q: What fonts are built into the UC5E?
A: None. True Type fonts installed on your operating system will print
to the UC5E.
Q: Will the UC5E allow the Digital Duplicator to create an A3 / 11” x
17” image?
A: Yes, as long as the Digital Duplicator model has the image output
capability.
Q: Can you combine two A4 / US Letter pages side by side into a single
A3 / 11” x 17” image?
A: No. The laying out of two pages A4 / US Letter has to be done in the
software where you are sending the image from.
Q: Can you reverse scan with the Controller and the Digital Duplica-
tor?
A: No.
Q: Can you set the number of copies to print from the computer?
A: Yes, all the newer Digital Duplicator models allow you to set the copy
count from your computer.
Q: If I have a software or hardware question, who do I call?
A: Your local sales/service organisation should be contacted first or con-
nect to the web site www.ziprip.com.
Q: I have entered a custom page size but the print job comes out too
small?
A: It is possible that you have input the page size incorrectly. The Unit
of measurement used for page size is 0.01 inches or 0.1 mm. This
means that you need to multiply by a factor of 100 to get the correct
size in inches or a factor of 10 to get the correct size in mm.