Operating instructions

Troubleshooting
74
7
No Toner
The following toner has run
out.
Open the indicated cover, and
then replace the Toner Car-
tridge.
Top Cover : [Magenta]
The printer is out of toner
(Magenta).
Replace the print cartridge
(Magenta).
See p.51 “Replacing the Print
Cartridge”
No Toner
The following toner has run
out.
Open the indicated cover, and
then replace the Toner Car-
tridge.
Top Cover : [Cyan]
The printer is out of toner (Cy-
an).
Replace the print cartridge
(Cyan).
See p.51 “Replacing the Print
Cartridge”
No Toner
The following toner has run
out.
Open the indicated cover, and
then replace the Toner Car-
tridge.
Top Cover : [Yellow]
The printer is out of toner
(Yellow).
Replace the print cartridge
(Yellow).
See p.51 “Replacing the Print
Cartridge”
Waste Toner Bottle Full
The Waste Toner Bottle is full.
Open the indicated cover, and
then replace the Waste Toner
Bottle.
Front Cover : [Waste Toner
Bottle]
It is time to replace the waste
toner box
Replace the waste toner box
with a new one.
See p.56 “Replacing the Waste
Toner Bottle”.
Tray Not Detected
The selected paper source tray
is not set, or is not set proper-
ly.
Check the indicated tray.
[Tray 1]
The indicated paper input
tray is not installed correctly,
or not installed.
Install the indicated paper in-
put tray correctly.
Functional problem within
the printer.
Turn power switch off, then
on.
If the error appears again,
please call service.
SC828
There is a problem with the
controller's ROM.
Turn off the main power, and
then turn it on again.
If the error occurs again, con-
tact your service representa-
tive.
Message Explanation Recommended Action