Operating instructions

Troubleshooting
72
7
Paper Size Mismatch
Paper of the selected paper
size is not loaded in the indi-
cated paper source tray.
[Tray 2]
The paper size setting in the
tray differs from that of actual
paper size in the tray.
Load paper of the selected size
in the tray, and then change
the paper size setting with
Smart Organizing Monitor.
Misfeed recovery print failed.
Please try to print again.
The print data could not be re-
covered due to insufficient
memory.
Print again.
Cannot use collate function.
Set the collate function from
the printer driver.
The computer does not have a
print control module, or the
job does not use a print driver.
Use the DDST driver to print.
Paper Type Mismatch
Paper of the selected type is
not loaded in the indicated pa-
per source tray.
Check the indicated tray.
[Tray 1]
The paper type setting in the
tray differs from that of actual
paper type in the tray.
Load paper of the selected
type in the tray, and then
change the paper type setting
with Smart Organizing Moni-
tor.
Paper Type Mismatch
Paper of the selected type is
not loaded in the indicated pa-
per source tray.
Check the indicated tray.
[Tray 2]
The paper type setting in the
tray differs from that of actual
paper type in the tray.
Load paper of the selected
type in the tray, and then
change the paper type setting
with Smart Organizing Moni-
tor.
Paper Type Mismatch
Paper of the selected type is
not loaded in the indicated pa-
per source tray.
Check the indicated tray.
[Bypass Tray]
The paper type setting in the
tray differs from that of actual
paper type in the tray.
Load paper of the selected
type in the tray, and then
change the paper type setting
with printer driver.
Paper Misfeed
Open the indicated cover, and
then remove any misfed pa-
per.
[Front Cover]
There is a misfeed in the print-
er.
Remove the misfed paper.
See p.89 “Removing Misfed
Paper”
No Paper
Load paper in the indicated
paper source tray.
[Tray 1]
The indicated tray is out of pa-
per.
Load paper into the indicated
paper tray.
No Paper
Load paper in the indicated
paper source tray.
[Tray 2]
The indicated tray is out of pa-
per.
Load paper into the indicated
paper tray.
Message Explanation Recommended Action