Operating instructions

Replacing Consumables
52
5
❖ When to replace the print cartridge
If the Alert indicator or any of the toner indicators on the control panel light up,
or the message “
No Toner. The following toner has run out. Open the
indicated cover, and then replace the Toner Cartridge. Top Cover
: [Black/Yellow/Magenta/Cyan]
” appears on the Smart Organizing Moni-
tor dialog box, replace the indicated print cartridge.
• If cyan, magenta, or yellow toner runs out, you can print in black and white
using black toner. Change the color mode setting to Black and White using
the printer driver.
• If black toner runs out, you cannot print in black and white or color until
the black print cartridge is replaced.
Important
❒ Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.
❒ Do not expose the print cartridge without its cover to direct sunlight for a
long time.
❒ Do not touch the print cartridge's photo conductor unit.
❒ When removing print cartridges, be careful not to touch the Laser Scanning
Unit on the underside of the upper cover (the white area in the illustration be-
low).
ASH100S
ASH106S